HPHT Lab Grown Rough Diamond Making Machine Cubic Press

Short Description:

Innovative processing method, no need for repetitive machine operations, preventing compromised precision from frequent repositioning; the alignment of the six cylinders is within 0.1mm, greatly surpassing the 0.4mm national standard; the beam’s verticality, parallelism, and symmetry measure 0.05mm respectively, falling well below the 0.3mm national standard; smoothness is recorded at 1.6, significantly surpassing the 3.2-6.3 national standard.Processing with a 5-axis machining center, the efficiency exceeds that of the soil boring machine by a factor of 3, while the accuracy is more than 10 times superior, simplifying assembly and reducing the need for tooling technicians.

Send email to us

Product Detail

Product Tags

Advanced Tech

High-precision processing equipment operates with stability, consuming anvils at a minimal rate; the equipment's service life is 30% longer compared to other industry counterparts, resulting in approximately 50% savings in diamond production costs. Additionally, this equipment type offers a larger cavity, providing a larger usable anvils surface and boosting production capacity by 20% beyond industry standards.

HPHT Machine Advantage

Accurate processing, accuracy within 5μm, convenient assembly, stable performance.

Spacious cavity, ample usable anvil area, elevated design pressure, increased production capacity, and excellent quality.

Specialized heat treatment, equipment malleability, enhanced flexibility.

Components of any machine can be swapped and managed in a standardized way.

The equipment's lifespan is 50% longer than that of rival machines.

Machine Model

No	Item	Casting							Forging
No	Item	BZ650	BZ700	BZ750	BZ800	BZ850	BZ900	BZ1050	BD650	BD800	BD850
1	Single Cylinder Thrust（MN)	36.5	42	48.5	55	62	63.6	81.4	37.5	56	63
2	Design pressure(MPa)	120	120	120	130	130	130	130	120	130	130
3	Rated Pressure（MPa)	96	96	96	96	96	96	96	98	98	98
4	Diameter of Cylinder(mm)	650	700	750	800	850	900	1050	650	800	850
5	Maximum Piston Stroke (mm)	100	95	95	100	100	100	110	90	90	90
6	Opening Height（mm）	845	930	970	1010	1000	1000	1080	845	950	980
7	Closing Height（mm）	645	730	770	810	820	820	880	665	770	800
8	Boost Ratio	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1	7.7:1
9	Supercharger Oil Discharge（L）	29	32	34	37	40	43	52	29	37	40
10	Electric Heating Power （KVA）	60	60	60	70	80	80	100	60	70	80
11	Total Motor Power （KW）	30	30	30	40	40	40	50	30.5	40	40
12	Overall dimension (LxWxH) （mm)	2660x2660x3260	2830×2830×3430	2940×2940×3500	2990x2990x3590	3080x3080x3680	3140×3140×3740	3430x3430x4060	264026403240	293029303530	302030203620
13	Total weight（t）	54.5	67	73	81.5	92	98	120	58.3	75	86
14	Application Scope	Type I Material、Superfine Material、PCD,CBN	Type I Material、Superfine Material、PCD,CBN	Type I Material、Superfine Material、PCD,CBN	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD	Diamond、Big Monomorph、Big PCBN、PCD

Core Technology

Force diagram of six-axis multi-anvil press

six-axis multi-anvil press anvil

Cracking accident during the synthesis process of six-axis multi-anvil

Higher precision by a factor of 10, increased pressure by 20%, and extended lifespan by 1.5 times.The synthetic block's gravity center is located at its central point in volume: the structure of the synthetic block is symmetrically assembled in the heating direction - the non-heating hammers' directions are completely symmetrical, and the two heating hammers' directions are symmetrical as well. In the process of synthesizing synthetic diamond using high temperature and high pressure, overcoming cracking and blasting has always been a challenge that people strive to fully address. In addition to potential defects in the cemented carbide anvil's quality and the synthetic block's structural design, the design, production, and adjustment of the six-sided top press must meet the three-in-one requirements to ensure balanced deformation and force distribution in each part of the machine and eliminate any possibility of firing issues.The coincidental center of the cemented carbide top hammer: the position of the cemented carbide top hammer's force center has no direct correlation with the relative position of the hinge beam structure center, with only the cemented carbide anvil's force center being concentrated at one point, which ideally coincides with the hinge beam structure center point.